Utility Table
Creator8083
Modelo 3D interativo: gire para inspecionar, abra no designer para personalizar
Este projeto é compartilhado pela comunidade e serve como referência e ponto de partida. Verifique todas as dimensões e a correção estrutural antes de cortar
Table for use in a shop. Legs and back wall are angle iron while the table top could be made from a metal sheet or a slab of wood by adding some bolt holes in the table frame. I was having trouble ling up the table top with the frame because there were objects colliding but there is more angle iron along the front and side with the outside corner on the uppermost outside corner while the angle iron on the back is oriented with the outside corner on the low outside corner to prevent items from rolling and falling behind the table.
Fator geral de aproveitamento do material - 24.99 %
Comprimento total da fita de borda - 54.452 m
Comprimento total de corte - 75.886 m
Comprimento total da fita de borda - 54.452 m
Comprimento total de corte - 75.886 m
| Materiais | Ferragens |
|---|---|
|
Aglomerado laminado 16x1830x2750 ( color W1000_9) - 1 pcs. + Fita de borda 0.04 x 0.75 (W1000_9) - 54.452 m |
Hardware not specified |
