Utility Table

Creator8083
0%
Utility Table Flatmaコミュニティの無料3D家具プロジェクトと図面
Table for use in a shop. Legs and back wall are angle iron while the table top could be made from a metal sheet or a slab of wood by adding some bolt holes in the table frame. I was having trouble ling up the table top with the frame because there were objects colliding but there is more angle iron along the front and side with the outside corner on the uppermost outside corner while the angle iron on the back is oriented with the outside corner on the low outside corner to prevent items from rolling and falling behind the table.
材料全体の利用係数 - 24.99 %
合計エッジバンディング長さ - 54.452 m
合計切断長さ - 75.886 m
材料 ハードウェア
ラミネートパーティクルボード 16x1830x2750 ( color W1000_9) - 1 個
+ エッジバンディング 0.04 x 0.75 (W1000_9) - 54.452 m

Hardware not specified
このEメールは既に登録されています
登録
Eメール
パスワード
「登録」ボタンをクリックすることで、
利用規約
に同意したものとみなされます ログイン
ログイン
Eメール
パスワード
登録
言語を選択