Тумба под 3D принтер
Creator88272
Interactive 3D model: rotate to inspect, open in designer to customize
This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting
Тумба под 3D принтер Creality
Overall material utilization factor - 35.83 %
Total edge banding length - 4.57′ (15.001 m)
Total cutting length - 12.73′ (41.761 m)
Total edge banding length - 4.57′ (15.001 m)
Total cutting length - 12.73′ (41.761 m)
| Materials | Hardware |
|---|---|
|
Laminated Particle Board 0.63″x81.5″x110.24″ (16x2070x2800 mm) ( color W1000_9.webp) - 1 pcs. + Edge banding 0.4 x 19 (W1000_9.webp) - 4.57′ (15.001 m) Particle Board 0.12″x66.93″x108.07″ (3x1700x2745 mm) ( color W1000_9) - 1 pcs. + Edge banding - 0′ (0 m) |
Hardware not specified |
