Simple Wardrobe with sliding doors
Interactive 3D model: rotate to inspect, open in designer to customize
This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting
Total edge banding length - 6.94′ (22.758 m)
Total cutting length - 22′ (72.192 m)
| Materials | Hardware |
|---|---|
|
Particle Board 0.12″x66.93″x108.07″ (3x1700x2745 mm) ( color H1277_9) - 1 pcs. + Edge banding - 0′ (0 m) Upper Guide A04 1.57″x3.23″x106.3″ (40x82x2700 mm) ( color H1636_12) - 1 pcs. + Edge banding - 0′ (0 m) Lower Guide A08 0.24″x2.4″x106.3″ (6x61x2700 mm) ( color W1000_9) - 1 pcs. + Edge banding - 0′ (0 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1636_12) - 2 pcs. + Edge banding 1 x 19 (H1636_12) - 4.37′ (14.326 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1122_22) - 1 pcs. + Edge banding 1 x 19 (W1000_9) - 2.57′ (8.432 m) Зеркало 0.16″x63.19″x100.39″ (4x1605x2550 mm) ( color Mirror) - 1 pcs. + Edge banding - 0′ (0 m) |
Confirmats - 22 pcs. Rafixes - 6 pcs. |
Description by Flatma:
DIY Sliding Door Wardrobe: Plans, Dimensions & Materials
This modern minimalist wardrobe design brings clean lines and functional storage to any bedroom. The freestanding unit features a combination of a mirrored sliding door and a contrasting wood panel, creating a sleek aesthetic that maximizes space. The design offers ample storage for clothes and accessories, with the sliding door mechanism providing easy access without requiring clearance for a swinging door. This wardrobe design inspiration serves as a practical starting point for a custom built-in closet project.
Construction Details: Wardrobe Plans with Dimensions
The wardrobe dimensions measure 1605 mm (63 inches) wide, 2550 mm (100.4 inches) high, and 600 mm (23.6 inches) deep. This rectangular, closed-system cabinet provides a standard depth for hanging garments. The design incorporates two vertical sliding sections, one with a full-length mirror and the other with a solid panel. The sliding door mechanism relies on an upper guide (A04 2700x82x40) and a lower guide (A08 2700x61x6) for smooth, space-saving operation. These built-in closet blueprints detail the exact panel cuts required for assembly.
Materials and Hardware
Primary construction uses 16 mm laminated particle board (melamine board) in colors H1636_12 and H1122_22, along with a 3 mm particle board (DVP) back panel in H1277_9. The project requires a total of four full sheets, achieving a material utilization factor of 43.58%. Edge banding totals 22.758 meters, with 14.326 meters of H1636_12 and 8.432 meters of W1000_9 applied for durability and a finished look. A 4 mm thick mirror sheet measuring 1605x2550 mm serves as one door panel.
Assembly Process
Assembly involves joining the pre-cut cabinet carcass panels, followed by applying the specified edge banding. The total cut length for all components is 72.192 meters. Installing the upper and lower sliding door guides requires precise alignment to ensure the doors operate smoothly. The mirrored and solid panels then mount onto the sliding door hardware to complete the freestanding unit.
Adaptation Options
These DIY closet plans serve as a reference material, not a final specification. The overall dimensions may require adjustment to fit specific room conditions and ceiling heights. Blueprints are available for preview before downloading, allowing for review of the panel layout and construction details. This approach provides a solid foundation for customizing the wardrobe's size, finish colors, or internal configuration.
Frequently Asked Questions
Q: How can I adapt these wardrobe plans to fit a smaller bedroom?
A: The width and height can be modified, but maintaining the 600 mm (23.6 inch) depth is crucial for standard hangers. Adjusting the panel dimensions proportionally and recalculating the cut list from the blueprints is necessary. The original design uses a total panel cut length of 72.192 meters, which would change with new dimensions.
Q: What materials and how many sheets are needed to build this?
A: The project requires four primary sheets: two 16x1830x2750 mm boards in H1636_12, one in H1122_22, and one 3x1700x2745 mm back panel in H1277_9. A single mirror sheet is also specified. The material efficiency for the particle board is 43.58%.
Q: How complex is the assembly process for a DIY sliding door wardrobe?
A: The assembly involves standard cabinet construction but requires careful installation of the sliding door hardware. The project has a total edge banding length of 22.758 meters that needs application, and precise alignment of the upper and lower guides is key for proper door function.
Q: How do I download and use the blueprints for this project?
A: Blueprints are available for preview, showing all dimensions and the cut list. After reviewing, they can be downloaded. Use them as a starting point, verifying all measurements against your actual space, as site conditions often require adjustments to the final specifications.
