Freestanding Entryway Wardrobe: DIY Plans & Assembly
Interactive 3D model: rotate to inspect, open in designer to customize
This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting
Total edge banding length - 14.05′ (46.082 m)
Total cutting length - 32.59′ (106.924 m)
| Materials | Hardware |
|---|---|
|
Laminated Particle Board 0.63″x81.5″x110.24″ (16x2070x2800 mm) ( color H1180_37) - 2 pcs. + Edge banding 1 x 19 (H1180_37) - 10.69′ (35.078 m) Laminated Particle Board 0.63″x81.5″x110.24″ (16x2070x2800 mm) ( color U104_9) - 1 pcs. + Edge banding 1 x 19 (U104_9) - 3.35′ (11.004 m) Particle Board 0.12″x81.5″x110.24″ (3x2070x2800 mm) ( color W1000_9) - 1 pcs. + Edge banding - 0′ (0 m) Particle Board 0.12″x48.03″x96.06″ (3x1220x2440 mm) ( color U104_9) - 1 pcs. + Edge banding - 0′ (0 m) Зеркало 0.16″x63.19″x100.39″ (4x1605x2550 mm) ( color Mirror) - 1 pcs. + Edge banding - 0′ (0 m) |
Confirmats - 50 pcs. Hinge - 7 pcs. Minifixes - 8 pcs. Rafixes - 10 pcs. Shelf Holder - 2 pcs. |
Description by Flatma:
This modern freestanding entryway wardrobe combines minimalist design with practical storage, ideal for organizing coats, shoes, and accessories right at the door. Its clean lines and hybrid open-and-closed storage create a functional focal point. The full-length mirror panel adds convenience and visually expands the space, while the natural wood and neutral finishes offer versatile styling that complements various interior decors.
Construction Details: Wardrobe Plans with Dimensions
The wardrobe stands 8 ft 4 in (2550mm) tall, 5 ft 3 in (1605mm) wide, and 17.7 in (450mm) deep, a freestanding design that fits standard entryway spaces. The blueprint details a rectangular vertical unit with four closed compartments and one open shelving area. These dimensions align with common storage needs, providing ample hanging space for outerwear and shelving for smaller items. The full-height mirror panel integrates seamlessly into one section, reflecting the room's light and creating a sense of openness.
Materials and Hardware
Construction primarily uses 16mm laminated particle board (melamine) in colors H1180_37 and U104_9, with a 3mm particle board backer in W1000_9. The project requires two full sheets (2070x2800mm) of the primary board and one sheet (1220x2440mm) of the backer material. A 4mm thick, 63x100 inch mirror panel serves as the reflective surface. All exposed edges receive 1x19mm edge banding, totaling 151 feet of H1180_37 and 36 feet of U104_9 banding. The material utilization rate reaches 37.05%, maximizing sheet use and minimizing waste.
Assembly Process
Assembly involves cutting components from the listed sheet goods to a total cut length of 351 feet. Precise edge banding application on all visible edges ensures a finished look. The process follows standard cabinet assembly techniques, joining the carcass, installing internal partitions, and mounting the mirror and back panel. Blueprints provide the specific sequence and connection details for a stable final build.
Adaptation Options
These wardrobe plans offer a solid reference for customization. The overall height, width, or compartment layout can adjust to fit unique entryway dimensions or specific storage requirements. Blueprints are available for preview before downloading, allowing for a thorough review. Remember, dimensions may require adjustment to fit specific site conditions, and the project serves as a reference material and starting point, not a final specification.
Frequently Asked Questions
Q: How can I adapt these wardrobe dimensions for a smaller entryway?
A: The width and depth offer the most straightforward adjustment points. Reducing the width from 63 inches allows the unit to fit narrower halls, which may involve recalculating compartment sizes. The 17.7-inch depth provides a standard for coat hanging but can be slightly modified if needed.
Q: What materials are required to build this entryway closet?
A: The material list specifies three primary sheet goods: two large sheets of 16mm laminated board, one sheet of 3mm backer board, and one full mirror panel. The exact article numbers are H1180_37, U104_9, and W1000_9 for the boards, ensuring color and finish consistency.
Q: How complex is the assembly process for a DIYer?
A: The assembly involves standard cabinet-making steps but requires careful handling of the large mirror panel. With a total cut length of 351 feet and 187 feet of edge banding to apply, the project demands precise cutting and finishing work for a professional result.
Q: How do I download and use the provided blueprints?
A: Blueprints are available for preview, which lets you review all dimensions and the cut list. After downloading, use them as a detailed guide, but treat the 37.05% material utilization rate as a benchmark for your own calculations when sourcing sheets for a modified size.
