Subwwoofer

Creator107422

0%

Subwwoofer Free 3D Furniture Projects and Blueprints from the Flatma Community

Interactive 3D model: rotate to inspect, open in designer to customize

This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting

Open in Flatma

Overall material utilization factor - 9.81 %
Total edge banding length - 1.84′ (6.032 m)
Total cutting length - 11.64′ (38.2 m)

Materials	Hardware
Laminated Particle Board 0.75″x72.05″x108.27″ (19x1830x2750 mm) ( color U337_9) - 1 pcs. + Edge banding 1 x 21 (W1000_9) - 1.15′ (3.764 m) Laminated Particle Board 0.75″x72.05″x108.27″ (19x1830x2750 mm) ( color U600_9) - 1 pcs. + Edge banding 1 x 21 (U600_9) - 0.4′ (1.296 m) Laminated Particle Board 0.75″x72.05″x108.27″ (19x1830x2750 mm) ( color U748_9) - 1 pcs. + Edge banding 1 x 21 (U748_9) - 0.3′ (0.972 m)	Hardware not specified

Materials

Hardware

Laminated Particle Board 0.75″x72.05″x108.27″ (19x1830x2750 mm) ( color U337_9) - 1 pcs.
+ Edge banding 1 x 21 (W1000_9) - 1.15′ (3.764 m)

Laminated Particle Board 0.75″x72.05″x108.27″ (19x1830x2750 mm) ( color U600_9) - 1 pcs.
+ Edge banding 1 x 21 (U600_9) - 0.4′ (1.296 m)

Laminated Particle Board 0.75″x72.05″x108.27″ (19x1830x2750 mm) ( color U748_9) - 1 pcs.
+ Edge banding 1 x 21 (U748_9) - 0.3′ (0.972 m)

Hardware not specified

Other similar projects

машинка сушилка и другие остатки