Library Reception Counter Blueprint - Cut List

Overall material utilization factor - 44.82 %
Total edge banding length - 4.11′ (13.488 m)
Total cutting length - 9.68′ (31.757 m)

Description by Flatma:

This project features a compact reception desk for a reading room or library entrance. The design functions as a small counter/desk hybrid with a modesty panel, open knee space, and a raised privacy back panel for greeting visitors. Reception desk plans are presented with straightforward joinery so the build suits both workshop and on‑site assembly. The geometry is optimized for sheet goods, helping reduce waste while keeping a clean, minimalist look suitable for public interiors.

Construction Features

The construction incorporates laminated particle board panels at 0.63 in (16 mm) thickness. Suggested overall sizing can be scaled, but the layout is arranged to nest parts efficiently on two sheets measuring 72.05 x 108.27 in (1830 x 2750 mm). A simple carcass uses side gables, a horizontal worksurface, and a vertical modesty panel; a taller rear panel provides privacy and signage space. Edges visible to users are finished with edge banding for a refined appearance. Provision for cable routing, grommets, or under‑desk power strips can be added during drilling and routing. Reception desk plans and desk blueprints include a cut list and assembly sequence for accurate pre‑drilling and fastening.

Materials and Hardware

- Sheet goods: 2 panels of laminated particle board, 0.63 in (16 mm), 72.05 x 108.27 in (1830 x 2750 mm), neutral gray tone (U763_9). - Edge banding: 0.04 x 0.75 in (1 x 19 mm), total length approx. 44.3 ft (531.2 in / 13.488 m). - Estimated total cut length: about 104.2 ft (1250.7 in / 31.757 m). - Fasteners (typical): wood screws, dowels or cams, corner brackets as needed. Mounting hardware for optional cable grommets is specified in the plans. - Utilization factor reference: 44.82%, allowing for offcuts and test pieces.

Customization Options

The project can be adapted to different room dimensions, ADA/ergonomic heights, or alternative finishes such as veneer or laminate. Element dimensions can be adjusted for wider worktops, transaction overhangs, or integrated storage. After detailed review, the blueprints are available for download and can be tailored to specific requirements.