Guitar/record player stand

Creator107987

0%

Guitar/record player stand Free 3D Furniture Projects and Blueprints from the Flatma Community

Interactive 3D model: rotate to inspect, open in designer to customize

This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting

Open in Flatma

Overall material utilization factor - 7.18 %
Total edge banding length - 6.57′ (21.555 m)
Total cutting length - 40.13′ (131.654 m)

Materials	Hardware
Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1146_10) - 1 pcs. + Edge banding 0.04 x 0.75 (W1000_9) - 1.35′ (4.439 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1137_12) - 1 pcs. + Edge banding 0.04 x 0.75 (W1000_9) - 2.51′ (8.238 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1115_12) - 1 pcs. + Edge banding 0.04 x 0.75 (W1000_9) - 2.71′ (8.878 m)	Hardware not specified

Materials

Hardware

Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1146_10) - 1 pcs.
+ Edge banding 0.04 x 0.75 (W1000_9) - 1.35′ (4.439 m)

Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1137_12) - 1 pcs.
+ Edge banding 0.04 x 0.75 (W1000_9) - 2.51′ (8.238 m)

Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1115_12) - 1 pcs.
+ Edge banding 0.04 x 0.75 (W1000_9) - 2.71′ (8.878 m)

Hardware not specified

Other similar projects