DIY Computer Desk with Shelves: Plans and Measurements
Interactive 3D model: rotate to inspect, open in designer to customize
This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting
Total edge banding length - 7.01′ (23.014 m)
Total cutting length - 11.92′ (39.114 m)
| Materials | Hardware |
|---|---|
|
Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color U707_9) - 1 pcs. + Edge banding 1 x 19 (U707_9) - 6.85′ (22.476 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color W1000_9) - 1 pcs. + Edge banding 1 x 19 (W1000_9) - 0.16′ (0.538 m) |
Confirmats - 10 pcs. |
Description by Flatma:
This modern minimalist desk design merges a clean aesthetic with practical vertical storage, ideal for contemporary home offices or small apartments. The freestanding unit delivers a spacious workspace complemented by multiple open shelves and a lower compartment, creating a functional hub for work and organization. Its light gray and white color scheme offers a versatile look that fits various interior design ideas for studies and workspaces.
Construction Details: Desk Plans with Dimensions
The desk structure measures 1200x600x1800 mm, translating to a footprint roughly 4 feet wide by 2 feet deep and standing just under 6 feet tall. This height provides ample vertical space for shelving while maintaining a standard desk height for ergonomic use. The rectangular form features vertical structural elements supporting a desktop, upper shelving, and a lower open compartment. These standard dimensions for a computer desk with storage allow for efficient use of corner or wall space in a room.
Materials and Hardware
Construction utilizes two sheets of 16mm laminated particleboard (melamine board), one in a light gray finish (U707_9) and one in white (W1000_9). The project demonstrates efficient material use with a utilization factor of 25.21%. Edge banding, totaling 23.014 meters, is applied for a finished look and increased durability, with the light gray banding used for the majority of the visible edges.
Assembly Process
Assembling this desk involves cutting the panels to the required sizes, with a total cut length of 39.114 meters. Applying the edge banding to all exposed edges precedes the joinery phase. The design relies on straightforward carcass construction techniques, making the assembly process accessible for DIY enthusiasts familiar with building shelving units or bookcases.
Adaptation Options
These desk plans serve as a reference material and starting point for customization. The overall dimensions may require adjustment to fit specific site conditions in your home or office. Blueprints are available for preview before downloading, allowing you to assess the design and modify elements like shelf spacing or overall height to better suit your storage needs and available space.
Frequently Asked Questions
Q: How can I adjust these desk plans for a smaller room?
A: You can scale down the width or depth proportionally. The current design uses two full sheets of material, so reducing the footprint would also improve the material utilization factor, which currently sits at 25.21% for the provided dimensions.
Q: What materials do I need to build this desk?
A: The project requires two sheets of 16mm thick laminated particleboard. You will need one sheet in a light gray color (article U707_9) and one sheet in white (article W1000_9), along with approximately 23 meters of matching edge banding.
Q: How difficult is the assembly for a beginner?
A: The process involves significant panel cutting, with a total cut length over 39 meters, and precise edge banding application. While the carcass construction is straightforward, managing these steps requires careful planning and suitable tools, placing it at an intermediate DIY level.
Q: How do I access the detailed blueprints for this project?
A: Detailed blueprints are available for download. You can preview them first to review all dimensions, the cutting layout on the two material sheets, and the assembly sequence before proceeding with your build.
