cabinet incruster
Creator149592
Interactive 3D model: rotate to inspect, open in designer to customize
This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting
I have a small recess in the wall and I want to make a piece of furniture on the inside with colored plexiglass sliding doors so I want two doors and spokes without wheels measuring the furniture without 1m56 long 60cm height 34cm depth
Overall material utilization factor - 18.66 %
Total edge banding length - 4.99′ (16.364 m)
Total cutting length - 17.54′ (57.539 m)
Total edge banding length - 4.99′ (16.364 m)
Total cutting length - 17.54′ (57.539 m)
| Materials | Hardware |
|---|---|
|
Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color FL-W305) - 1 pcs. + Edge banding 1 x 19 (FL-W305) - 3.47′ (11.372 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color FL-E092) - 1 pcs. + Edge banding 1 x 19 (FL-E092) - 0.76′ (2.496 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color FL-E108) - 1 pcs. + Edge banding 1 x 19 (FL-E092) - 0.76′ (2.496 m) Particle Board 0.12″x66.93″x108.07″ (3x1700x2745 mm) ( color FL-E077) - 1 pcs. + Edge banding - 0′ (0 m) |
Confirmats - 14 pcs. Hinge - 4 pcs. Minifixes - 4 pcs. |
