Utility Table

Creator8083
0%
Utility Table Proyek dan denah furnitur 3D gratis dari Komunitas Flatma
Table for use in a shop. Legs and back wall are angle iron while the table top could be made from a metal sheet or a slab of wood by adding some bolt holes in the table frame. I was having trouble ling up the table top with the frame because there were objects colliding but there is more angle iron along the front and side with the outside corner on the uppermost outside corner while the angle iron on the back is oriented with the outside corner on the low outside corner to prevent items from rolling and falling behind the table.
Faktor pemanfaatan material keseluruhan - 24.99 %
Total panjang edging - 54.452 m
Total panjang pemotongan - 75.886 m
Bahan Perangkat keras
Papan partikel laminasi 16x1830x2750 ( color W1000_9) - 1 pcs.
+ Pita pinggir 0.04 x 0.75 (W1000_9) - 54.452 m

Hardware not specified
Pengguna dengan e-mail tersebut sudah ada
Daftar
E-mail
Kata Sandi
Dengan mengklik tombol 'Daftar', Anda menerima syarat
Perjanjian Pengguna
Sudah terdaftar? Masuk
Masuk
E-mail
Kata Sandi
Daftar
Pilih bahasa