DIY L-Shaped Wardrobe and Desk: Blueprint & Assembly Guide
Interactive 3D model: rotate to inspect, open in designer to customize
This project is shared by the community and serves as a reference and starting point. Verify all dimensions and structural correctness before cutting
Total edge banding length - 15.76′ (51.713 m)
Total cutting length - 30.38′ (99.672 m)
| Materials | Hardware |
|---|---|
|
Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color U707_9) - 1 pcs. + Edge banding 1 x 19 (W1000_9) - 4.31′ (14.128 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color W1000_9) - 2 pcs. + Edge banding 1 x 19 (W1000_9) - 6.69′ (21.937 m) Particle Board 0.12″x81.5″x110.24″ (3x2070x2800 mm) ( color W1000_9) - 1 pcs. + Edge banding - 0′ (0 m) Countertop 1.1″x23.62″x161.42″ (28x600x4100 mm) ( color W1000_9) - 1 pcs. + Edge banding - 0′ (0 m) Laminated Particle Board 0.63″x72.05″x108.27″ (16x1830x2750 mm) ( color H1122_22) - 1 pcs. + Edge banding 1 x 19 (W1000_9) - 4.77′ (15.648 m) |
Confirmats - 72 pcs. Hinge - 12 pcs. |
Description by Flatma:
This contemporary modular storage unit merges sleek design with practical functionality, offering a versatile solution for organizing a bedroom, home office, or living area. The L-shaped configuration combines a wardrobe unit with open shelving and an integrated workspace, creating a modern built-in look. The design utilizes a clean color palette of matte finishes to complement various interior styles, providing both concealed storage and accessible display space.
Construction Details: Wardrobe Plans with Dimensions
The unit measures 2700 mm (106.3 in) wide, 2100 mm (82.7 in) high, and 600 mm (23.6 in) deep, forming a substantial L-shaped footprint. The design features two primary vertical sections: a left-side shelving module and a right-side wardrobe unit, connected by a middle countertop. This layout provides a functional workspace while maintaining a depth consistent with standard closet dimensions. The blueprint details both wall-mounted upper cabinets and freestanding lower sections, ensuring structural integrity.
Materials and Hardware
Construction primarily uses 16 mm laminated particle board (melamine board) in three colors: U707_9, W1000_9, and H1122_22. The project requires four full sheets of this material. A 3 mm particle board (DVP) sheet in W1000_9 and a 28 mm thick countertop, also in W1000_9, complete the material list. All exposed edges receive 1 x 19 mm edge banding in W1000_9, totaling 51.713 meters (169.7 ft) of applied trim. The material utilization factor for this plan is 45.43%.
Assembly Process
Assembly involves constructing individual cabinet carcasses for the wardrobe and shelving units before joining them with the countertop. The total cut length for all components is 99.672 meters. Precise application of the extensive edge banding is crucial for a finished appearance. The blueprint serves as a reference for sequencing panel assembly and hardware placement.
Adaptation Options
These wardrobe plans with dimensions offer a solid foundation that can be modified. The overall height, width, or depth may require adjustment to fit specific room conditions and ceiling heights. Blueprints are available for preview before downloading, allowing for review of the L-shaped configuration and storage layout. This project provides a detailed starting point for customization, not a final specification for every installation scenario.
Frequently Asked Questions
Q: How can I adjust these DIY closet plans to fit a smaller wall?
A: The width can be reduced by modifying the shelving module or wardrobe unit individually while maintaining the 600 mm depth. The blueprint's 45.43% material utilization indicates efficient nesting, so recalculating cuts for new panel sizes is essential when scaling down.
Q: What materials are required to build this unit?
A: You will need four sheets of 16mm laminated particle board, one sheet of 3mm particle board, and one 28mm thick countertop. The plan specifies three finish colors (U707_9, W1000_9, H1122_22) and requires 51.713 meters of 1x19 mm edge banding in W1000_9.
Q: How complex is the assembly for a DIY woodworking project?
A: The assembly involves constructing multiple cabinet boxes and joining them accurately, with a total of over 99 meters of panel cuts to manage. The process requires careful attention to the 51.7 meters of edge banding application for a professional finish.
Q: How do I access and use the blueprints for this project?
A: The detailed blueprints are available for preview before downloading. They provide the L-shaped configuration, exact panel dimensions, and cut lists, serving as a comprehensive reference for your build or for further customization with a contractor.
